Aspire BP Replacement Coils - 5 Pack

A family of heads for several Aspire devices

The BP coils from Aspire are sold in boxes of five. The same base fits BP Stik and Veynom pods and Huracan tanks: when the flavour fades, you change only the head, without replacing the pod or the tank. The low values are mesh, a fine grid that heats quickly and evenly; the 0.6ohm and 1ohm keep a standard wire.

Which value for which use?

• BP Pro 0.15ohm (80 to 100W) and 0.15ohm (60 to 80W): direct-to-lung (DL, the vapour goes straight to the lungs) with plenty of vapour.
• 0.17ohm (45 to 55W) and 0.3ohm (30 to 40W): still DL, at a power that is easier to reach.
• 0.4ohm (25 to 35W): an airy but restricted draw (RDL), halfway between the two styles.
• 0.6ohm (15 to 25W) and 1ohm (10 to 16W): tighter draw that comes close to mouth-to-lung (MTL, the vapour goes through the mouth before being inhaled).

Which hardware accepts them?

Not every value fits everywhere: Aspire gives the list device by device.

• BP Stik and Veynom Air: all values, except the BP Pro 0.15ohm.
• Huracan Tank, supplied with the Revolto kit and the Huracan EX kit: BP Pro 0.15, 0.15, 0.17 and 0.3ohm only.
• Huracan Mini tank: 0.4, 0.6 and 1ohm.

The H2 tank uses a different base: for it, take the BP-F coils. Other models are gathered in the coils category.

Frequently asked questions

BP Coil, BP Series, BP80: is it the same coil?

Yes. Depending on the retailer, this same box of five Aspire heads carries one or other of these names; the base and values are identical.

How do I start a new coil?

Wet the cotton through the openings in the head, fill, wait a few minutes for the wick to soak, then start at the bottom of the power range for the chosen value.