Aspire Revvo Tank

A disc coil for high-power vaping

The Revvo tank from Aspire stands out with its ARC (Aspire Radial Coil) coil: instead of a vertical tube, the heating wire is laid flat, in a circle, on a cotton-lined disc. This layout offers a large heating surface. The Revvo is therefore designed for direct-to-lung inhalation, DL: the vapour goes in one go to the lungs, with an open draw and a big volume.

The 3.6ml tank fills from the top, through a spring-loaded opening, by unscrewing the plug. Three slots at the top of the tank let air in; by turning the ring, you open them wide or close them completely. Its 24mm diameter and 510 connection let it screw onto a wide range of box mods.

Key features

• Flat ARC coil, original and easy to replace
• Top fill, without taking the tank apart
• Top airflow, adjustable down to closed
• 24mm format, Stainless Steel finish
• Two ARC heads supplied for a reserve

In the box

• 1 x Revvo tank
• 2 x ARC coils
• 1 x spare glass tank
• 1 x set of O-rings

Compatibility

The Revvo works with Revvo ARC coils from 0.1 to 0.16ohm. The Revvo Boost and Revvo Mini versions have their own heads, which are not interchangeable. It needs a box mod able to deliver a lot of power: browse our box mods category. If you are looking for another tank for dense vapour, the H2 tank is a recent alternative, and other tanks await you among the tanks.

Frequently asked questions

What power should I set with the ARC coil?

Aspire states a range of 50 to 100W and advises staying around 80 to 85W. Start lower while the cotton is well soaked, then go up.

Do coils from the Revvo Boost or Revvo Mini fit?

No. Aspire gives each model its own head: for this tank, be sure to choose the Revvo ARC coil from 0.1 to 0.16ohm.