Aspire H2 Tank

A tank cut out for dense vapour

The H2 tank from Aspire is made for direct-to-lung inhalation, DL: the vapour is drawn in one go to the lungs, with an open draw and plenty of volume. Mounted on a box mod able to deliver power, it produces generous puffs while keeping depth in your e-liquid.

The tank holds 6ml with the straight glass installed, and 7ml with the bulged glass supplied as a spare. To fill, press the cap: the opening clears, nothing to unscrew. The airflow is set by a ring at the top of the tank: turn it to go from warm, dense vapour to a cooler puff. The wide 810 tip lets a large flow of vapour through.

Key features

• Large reserve: 6ml, or 7ml with the bulged glass
• E-liquid top fill, with a simple press
• Adjustable airflow located at the top of the tank
• Two BP-F mesh coils supplied to compare the results
• Replaceable 810 drip tip

In the box

• 1 x H2 tank
• 1 x BP-F Meshed 0.3ohm coil (installed)
• 1 x BP-F Meshed 0.17ohm coil
• 1 x spare glass (7ml)
• 1 x bag of seals
• 1 x user manual

Compatibility

The H2 works only with Aspire BP-F coils: Meshed Pro 0.15ohm, Meshed 0.15, 0.17 and 0.3ohm. For your spare stock, take the BP-F Mesh Pro Replacement Coils - 5 Pack. Note that standard BP coils have a different base: they fit for example the Huracan Mini tank, not the H2. With its 30mm diameter, choose a box mod wide enough in our box mods category.

Frequently asked questions

What power should I start with?

Aspire recommends 30 to 40W for the installed 0.3ohm and 45 to 55W for the 0.17ohm. The Meshed Pro 0.15ohm goes up to 80 to 100W: keep it for a box mod that can keep up.

Which box mod for this tank?

A box mod accepting 30mm diameter and at least 40W. With the lowest values, plan for a box mod that goes beyond 80W.