Vaporesso GEN SE Box Mod

A single-battery box mod for discovering direct inhalation

The GEN SE box mod from Vaporesso is a light box mod that runs on a single 18650 battery, sold separately. Its power, adjustable from 5 to 80W, can run an iTank T and its GTi 0.2ohm or 0.4ohm coils, the combination Vaporesso pairs with it. It is for vapers leaving a pod to gain vapour, with direct-to-lung inhalation (DL, the vapour-laden air goes straight to the lungs), without being burdened by a big two-battery box mod.

The AXON chipset starts in Pulse mode, which keeps power steady from the start to the end of the puff. The 0.96-inch TFT screen makes the settings easy to read, and a lock button prevents accidental firing in a bag. No separate charger needed: the battery recharges directly in the box mod through the USB-C port, at 5V / 2A.

GEN SE box mod highlights

• Light format with a single 18650 battery
• Power adjustable from 5 to 80W
• Pulse mode for steady power
• Button lock against accidental firing
• Battery charging over USB-C

In the box

• 1 x GEN SE box mod
• 1 x USB-C cable
• 1 x user manual and warranty card
• 1 x safety guide

Recommended tanks and coils

To reproduce the set planned by Vaporesso, choose the iTank T tank or the iTank T Dual Mesh, with GTi coils in 0.2ohm or 0.4ohm to stay within the range of the box mod. Its 510 connection also accepts other models from the tanks category. For more power with two batteries, see the GEN Max kit; the other box mods are in the box mods category.

Frequently asked questions

Does the GEN SE box mod come with a battery?

No, provide a good-quality 18650 battery. It recharges in the box mod with the included USB-C cable.

Which coil should I use with 80W maximum?

The GTi 0.2ohm (60 to 75W) and 0.4ohm (50 to 60W) coils stay within the range of the box mod. Avoid the 0.15ohm, intended for 75 to 90W.